Gigabyte B250 Motherboard.

• Processor (CPU)
  1. Supports 7th/6th generation processors in LGA1151 socket: Intel ® Core™ i7 processor/ Intel ® Core™ i5 processor/ Intel ® Core™ i3 processor/ Intel ® Pentium ® processor/ Intel ® Celeron ® processor device
  2. L3 cache depends on CPU

  (Please check *GIGABYTE’s website for a list of supported processors)

• chipset
  1. Intel ® B250 Express Chipset
• RAM
  1. 2 DDR4 DIMM slots, *support up to 32 GB
     * Due to the limitation of Windows 32-bit operating system, if more than 4 GB of memory is installed, the actual displayed memory capacity will be less than the actual installed memory capacity.
  2. Supports dual-channel memory technology
  3. DDR4 2400(OC)*/2133 MHz
     support To support 2400 MHz or XMP memory requires a 7th generation processor.
  4. Supports ECC Un-buffered DIMM 1Rx8/2Rx8 memory (operating in non-ECC mode)
  5. Support non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory
  6. Support for Extreme Memory Profile (XMP) memory
     * To support 2400 MHz or XMP memory requires a 7th generation processor.

  (Please check *GIGABYTE’s website for the supported memory speed and list)

• Display function

  Built-in graphics capable processor – supports Intel ® HD Graphics:

  1. 1 VGA interface, can support up to 1920×1200@60 Hz resolution

  Support *Shared Display Memory*1 GB

• sound effect
  1. Built-in Realtek ® ALC887 chip
  2. Support High Definition Audio
  3. Support 2/4/5.1/7.1 channel* To enable 7.1 channel audio output, you must use the audio output jack on the front panel of the HD (High Definition) audio module, and select multi-channel audio through the audio software Features.
  4. Support S/PDIF output
• The internet
  1. Built-in Realtek ® GbE network chip (10/100/1000 Mbit)
• Expansion slot
  1. 1 PCI Express x16 slot, supports x16 operating specification
  2. 1 PCI Express x1 slot
     (*PCI Express slots support PCI Express 3.0)
• storage device interface

  Built into the chipset:

  1. 1 x M.2 port (support Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2 SSD)
  2. 4 SATA 3.0 ports
     * M.2/SATA socket installation precautions, please refer to “1-7 socket and jumper introduction” section for instructions.
• USB

  Built into the chipset:

  1. 6 USB 3.1 Gen 1 ports (4 on the rear panel, 2 need to be connected to the USB socket on the motherboard via a cable)
  2. 6 USB 2.0 ports (2 on the rear panel, 4 need to be connected from the USB socket on the motherboard via a cable)
• Internal socket
  1. 1 24PIN motherboard power socket
  2. 1 8PIN CPU power socket
  3. 1 M.2 Socket 3 socket
  4. 4 SATA 3.0 ports
  5. 1 CPU fan header
  6. 1 system fan socket
  7. 1 front control panel socket
  8. 1 front audio jack
  9. 1 S/PDIF output socket
  10. 1 USB 3.1 Gen 1 socket (each socket can be connected to up to two front ports)
  11. 2 USB 2.0 sockets (each socket can be connected to up to two front ports)
  12. 1 onboard COM socket
  13. 1 clear CMOS data jumper
• Rear panel unit connection socket
  1. 1 PS/2 mouse interface
  2. 1 PS/2 keyboard interface
  3. 1 VGA interface
  4. 4 USB 3.1 Gen 1 ports
  5. 2 USB 2.0 ports
  6. 1 RJ-45 network interface
  7. 3 audio interfaces (audio in, audio out, microphone)